H PITCH
   
H 075 PITCH
H 100 & H 150 PITCH
   
 
L PITCH
   
L 050 PITCH
L 075 & L 100 PITCH
   
 
XL PITCH
   
XL 037 PITCH
   
 
T5 Timing Belt Pulleys
   
10mm & 16mm
25mm
   
 
T10 Timing Belt Pulleys
   
16mm & 25mm
32mm & 50mm
   
 
3M HTD P/B Pulleys
   
3M-9 & 3M-15
   
 
5M HTD P/B Pulleys
   
5M-9 & 5M-15
5M-25
   
 
8M HTD T/L Pulleys
   
8M-20 & 8M-30
8M-50 & 8M-85
   
 
8M HTD P/B Pulleys
   
8M-20 & 8M-30
8M-50 & 8M-85
   
 
 

Pulleys

In the I-TRANS range of Timing Belt Pulleys the following sizes are stocked:

T5 Belt Width = 10mm, 10-60 teeth
= 16mm, 10-60 teeth
= 25mm, 10-60 teeth


T10 Belt Width = 16mm, 10-60 teeth
= 25mm, 10-60 teeth
= 32mm, 10-60 teeth
= 50mm, 10-60 teeth

T5 and T10 are manufactured in alloy and are predominantly flanged pulleys with standard bores.

3M HTD PILOT BORED PULLEYS are manufactured in cast iron in two widths: 3M-9 and
3M-15. Both have teeth ranges from 10 to 72.

5M HTD PILOT BORED PULLEYS are manufactured in cast iron and come in three widths: 5M-09, 5M-15, and 5M-25. These three have tooth ranges from 12 to 72.

8M HTD is stocked in taper lock and pilot bored sizes. They are manufactured in cast iron. In the taper lock range there are four widths: 8M-20, 8M-30, 8M-50, and 8M-85. In the pilot bored range there are four widths: 8M-20, 8M-30, 8M-50 and 8M-85.
 
Related Products :

Timing Belts
T/L Bushes
Engineering Services

ring gears




   
     
Copyright I-Trans 2009 LTD