H PITCH     H 075 PITCH H 100 & H 150 PITCH       L PITCH     L 050 PITCH L 075 & L 100 PITCH       XL PITCH     XL 037 PITCH       T5 Timing Belt Pulleys     10mm & 16mm 25mm       T10 Timing Belt Pulleys     16mm & 25mm 32mm & 50mm       3M HTD P/B Pulleys     3M-9 & 3M-15       5M HTD P/B Pulleys     5M-9 & 5M-15 5M-25       8M HTD T/L Pulleys     8M-20 & 8M-30 8M-50 & 8M-85       8M HTD P/B Pulleys     8M-20 & 8M-30 8M-50 & 8M-85         Pulleys In the I-TRANS range of Timing Belt Pulleys the following sizes are stocked: T5 Belt Width = 10mm, 10-60 teeth = 16mm, 10-60 teeth = 25mm, 10-60 teeth T10 Belt Width = 16mm, 10-60 teeth = 25mm, 10-60 teeth = 32mm, 10-60 teeth = 50mm, 10-60 teeth T5 and T10 are manufactured in alloy and are predominantly flanged pulleys with standard bores. 3M HTD PILOT BORED PULLEYS are manufactured in cast iron in two widths: 3M-9 and 3M-15. Both have teeth ranges from 10 to 72. 5M HTD PILOT BORED PULLEYS are manufactured in cast iron and come in three widths: 5M-09, 5M-15, and 5M-25. These three have tooth ranges from 12 to 72. 8M HTD is stocked in taper lock and pilot bored sizes. They are manufactured in cast iron. In the taper lock range there are four widths: 8M-20, 8M-30, 8M-50, and 8M-85. In the pilot bored range there are four widths: 8M-20, 8M-30, 8M-50 and 8M-85.   Related Products : Timing Belts T/L Bushes Engineering Services Copyright I-Trans 2009 LTD